sometimes we found our LED HP server states green, blinking yellow or red.
Just visit official site.
-
- Howto setting iLOM May 29, 2009Change default password for "root", default = changeme set /SP/users/root password=password Create new username "admin" create /SP/users/admin Modify user profile "admin" set /SP/users/admin role=Administrator set /SP/users/admin cli_mode=alom Setting CLI prompt setsc sc_cliprompt SRVNAME Visit http://smiertx.blogspot.com […]noreply@blogger.com (smiertx bani ikhyar ...............)
- Differences between trusted and non-trusted systems? May 29, 2009 noreply@blogger.com (smiertx bani ikhyar ...............)
- Howto re-install PHP support Oracle Client May 29, 2009If we have default php installation in RHEL 4u6, and we need to reinstall with php5 with oracle client supported. Uninstall all PHP4 rpmrpm -qa | grep phprpm -e php-*Install PHP5 rpmrpm -ivh php-common-5*.rpmrpm -ivh php-cli-5*.rpmrpm -ivh php-5*.rpmrpm -ivh sqlite-3*.rpmrpm -ivh sqlite2-*.rpmrpm -ivh php-pdo-5*.rpmrpm -ivh php-oci8-5*.rpmInstall InstantClie […]noreply@blogger.com (smiertx bani ikhyar ...............)
- Howto Initialized EMC Storage CLAriion April 16, 2009 noreply@blogger.com (smiertx bani ikhyar ...............)
- Howto physical connection EMC CLAriion, IBM Blade, SAN Switch, Cisco Switch April 16, 2009Visit http://smiertx.blogspot.comnoreply@blogger.com (smiertx bani ikhyar ...............)
- Howto cstm on HP-UX April 12, 2009If we want to show all machine information, just use cstm. # cstm Running Command File (/usr/sbin/stm/ui/config/.stmrc). -- Information -- Support Tools Manager Version C.46.05 (C) Copyright Hewlett Packard Co. 1995-2002 All Rights Reserved Use of this program is subject to the licensing restrictions described in "Help-->On Version". HP shall no […]noreply@blogger.com (smiertx bani ikhyar ...............)
- Howto configure boot device order on ILOM April 12, 2009To ensure the system can be installed using the DVD drive, the boot device order in the BIOS has to be configured correctly so that the DVD drive takes precedence over the internal hard drives. 1 Log into the ILOM. 2 Start the system if it is not already running: > start /SYS else reset the system: > reset /SYS 3 Log onto the system’s console: > sta […]noreply@blogger.com (smiertx bani ikhyar ...............)
- Howto configure network on ILOM April 12, 2009The following steps will configure the network settings for the ILOM. 1 Connect a terminal to the ILOM serial management port. 2 Power up the server. 3 When prompted, login into the ILOM as root: login: root password: changeme (this should be the default password and can be confirmed by consulting the documentation shipped with the server). 4 Set the network […]noreply@blogger.com (smiertx bani ikhyar ...............)
- Howto soft partition on Solaris April 12, 2009If we wanna create soft partition on one physical partition, eg: partition 7. Show capacity partition 7 with command # format then choose your disk, eg: disk 0, now press "0" then enter partition menu with press "p" then print partition layout, press "p" we have example for partiton 7 like this : ------------- 7 unassigned wm 20 […]noreply@blogger.com (smiertx bani ikhyar ...............)
- System Kernel Hardening on Solaris March 20, 2009Just add this lines to your /etc/system file. Better to use it for high load server. set noexec_user_stack=1 set noexec_user_stack_log=1 set semsys:seminfo_semmni=100 set semsys:seminfo_semmns=1024 set semsys:seminfo_semmsl=256 set semsys:seminfo_semvmx=32767 set shmsys:shminfo_shmmax=4294967295 set shmsys:shminfo_shmmin=1 set shmsys:shminfo_shmmni=100 set s […]noreply@blogger.com (smiertx bani ikhyar ...............)
- Howto setting iLOM May 29, 2009
